Aileron Cable Fairlead

IMG_1635

Email me here

Last Update:

May 12, 2011

 

IMG_2710
IMG_2713
IMG_2724

Here’s my version of the aileron cable fairlead assembly. I decided to forego the use of bolts, nuts and Adel clamps. I found that the fairlead would slip comfortably into 7/8 x .058 alum tubing. The hole in the .032 aluminum plate will let the fairlead body pass through but capture the fairlead flange. The spring clip will then capture the tubing on the other end.

Partially assembled.

Final assembly on the mid rib.

NEXT PAGE

[Home] [History] [Small Jigs] [Ribs] [Ailerons] [Flaps] [Wings] [Aileron Cable Fairlead] [Root End Ribs] [Wiring Chase] [Skinning Jig] [Skinning] [Rivet Pattern] [Stiffeners] [AUX Fuel Tanks] [Main Fuel Tanks] [Tank Caps and Install] [Fuselage]